Basic Hydraulics Trainers FH-100Description
- Description
Description
The hydraulics trainers FH-100 are consist of actual industrial grade hydraulics components and parts which are commonly apply and used in industrial field. It is classified into basic level training experiments.
It is easily customizable in modular format for the logical analysis of electrics circuits, design and wiring in hydraulics and electro-hydraulics training experiments, which is included electric control for hydraulics sequence control. The expansion and compatibility of this modular system was considered with a 4mm binding post socket.
It uses a standard plug-in profile panel for common use of all the training set. Each part could be horizontally or vertically attached and detached on the profile panel without any tools.
Features:
- Modular design allows modifications to suit needs/requirements of the course/students.
- Custom sizes for the modular-board can also be provided upon request.
- Additional modular components can are also available separately should the need arise.
- High quality durable rubber-silicone compound gourmet on the modular-board ensures that the components stay in place yet smooth enough to ease removal and placement of components.
- Comes with high quality industrial grade components complete with quick release coupling mounted ready for use.
- Plates are made of high quality machined steel that do not deform after continued usage.
- Unit comes with various height (tilt) settings.
- All modules complete with male quick release coupling.
Component List
|
No |
Description |
Part Number |
Qty |
|
1 |
Plug Board Experiments Panel (600mm x 700mm) |
100-101 |
1 |
| Complete With: | |||
|
i |
Built-in Pressure Manifold Module |
100-102 |
1 |
|
ii |
Built-in Tank Manifold Module |
100-103 |
1 |
|
2 |
Power Pack Unit |
200-200 |
1 |
| Complete With: | |||
|
i |
1HP Single Phase Electric Hydraulic Motor Module |
200-201 |
1 |
|
ii |
Gear Pump |
200-202 |
1 |
|
iii |
Drive Coupling |
200-203 |
1 |
|
iv |
Oil Level Gauge with Thermometer |
200-204 |
1 |
|
v |
Breather Cap |
200-205 |
1 |
|
vi |
Strainer |
200-206 |
1 |
|
vii |
Return Line Filter C/W Pressure Gauge |
200-207 |
1 |
|
viii |
One Way Check Valve |
200-208 |
1 |
|
ix |
Double Solenoid Directional Control Valve |
200-209 |
1 |
|
x |
Modular Relief Valve |
200-210 |
1 |
|
xi |
Pressure Gauge (0~150Bar / 0~3500psi) |
200-211 |
1 |
|
xii |
Gauge Cock |
200-212 |
1 |
|
xiii |
Circuit Manifold |
200-213 |
1 |
|
xiv |
20 Liters Reservoir Tank |
200-214 |
1 |
|
xv |
Hydraulic Oil |
200-215 |
1 |
|
3 |
Ball Valve Module |
200-101 |
1 |
|
4 |
Pressure Gauge (0~150Bar / 0~3500psi) |
200-102 |
2 |
|
5 |
4/3 Way Manual Control Valve C/W Built-In Relief Valve Module |
200-103 |
1 |
|
6 |
Double Acting Hydraulic Cylinder Module |
200-104 |
1 |
|
7 |
T-Joint Module Complete with Quick Release Coupling |
200-105 |
2 |
|
8 |
Flexible Hydraulic Hose come with Female Quick Release Coupling (0.8m) |
200-301 |
7 |
|
9 |
Flexible Hydraulic Transparent Suction Spring Return Hose come with Female Quick Release Coupling (1.2m) |
200-304 |
1 |
Courseware and Accessories
|
No |
Description |
Part Number |
Qty |
|
1 |
Instruction Manual With Collection Of Circuit Exercises |
200-001 |
1 |
|
2 |
Hydraulic Simulation Software (Optional) |
200-050 |
1 |
|
3 |
Programmable Logic Controller Trainer – 30 I/O (Optional) |
200-060 |
1 |
Note: Products specification may vary for continue development and upgrading process.