Power Factor Correction Training Panel Complete With RLC Loading Units EM-600303Description
- Description
Description
The unit is specially developed for use in electrical teaching laboratory for the purposed of demonstrating the basic concept and the operating principle of power factor correction system.
FEATURES
- All Required components are systematically and didactically arranged on a sloping study panel with all internal components and circuit schematically represented by screen-printed mimic diagrams.
- Actual industrials system but specially adapted for teaching and demonstration purposes.
- Compact and self-contained unit available in a bench-top and mobile version.
- Circuit construction is achieved by patching together the desired components.
- All internal components and circuits are terminated as 4mm safety-type terminal sockets.
- Internal circuits are fully protected against overload and short-circuit faults.
TECHNICAL SPECIFICATIONS
- Input: 240/415VAC, 20A, 3 phase, 50Hz.
- Output: 240/415VAC, 20A, 3 phase, 50Hz to be connected to resistive, inductive and capacitive loading units.
EQUIPMENT INCLUDES
| POWER FACTOR CORRECTION PANEL EM-60-01-06P | |
o 3 x 22mm Pilot Lamp (R/Y/B) Main Phase Lamp o 1 x Power Factor Regulator/Controller 6 steps o 6 x Capacitor Banks of assorted ratings 1KVAr |
o 1 x Circuit Breaker 32A TP o 6 x Circuit Breaker 16A TP o 6 x Magnetic Contactors 240V o 6 x Indicating lights 240V o 1 x 32/5A Class 3, 5VA C/T Coil o 1 x Three Phase Power Meter · Able to measured voltage, current, power factor, active power, reactive power, apparent power and energy consumption KWH, KvarH, Frequency. · All parameters are true value (TRMS), input signal can be all kinds of wave. · Accuracy: ±0.5% FS±2 digit · Display: Programmable setting, switching, circularly 3 lines LED / LCD display · DC 4-20mA analog output, accuracy: ±0.5%FS. · Software communication with RS485 and Modbus RTU |
| RESISTIVE LOAD UNIT EM-30-07-01 (1KW) | INDUCTIVE LOAD UNIT EM-30-07-02 (1KVA) |
Single-Three phase Resistive Load 7 steps variable per phase o Max Power: 3 X 350Watt o Voltage: 240/415 Volt o Unit Type: Top Table
Main Characteristics
|
Single-Three phase Inductive Load 7 steps variable per phase o Max Power: 3 X 350VA o Voltage: 240/415 Volt o Unit Type: Top Table
Main Characteristics
|
| CAPACITIVE LOAD UNIT EM-30-07-03 (1KVA) | 4MM SAFETY STACKABLE TEST LEAD SET EM-30-15-02 |
Single-Three phase Resistive Load 7 steps variable per phase o Max Power: 3 X 350VA o Voltage: 240/415 Volt o – Unit Type: Top Table
Main Characteristics
|
o The set consists of 25 leads in 5 different coded colors (Red, Yellow, Blue, Black and Green) and lengths chosen to allow the realization of all experiment manual. o Leads are capable of 15A current safety plugs. o Safety Terminal Plug : 4mm o 250mm x 7 units o 500mm x 6 units o 1000mm x 6 units o 1500mmcm x 6 units |
Note: Due to products continuous development process, layout and specification may change without prior notices.